Bag Changing - Sears Kenmore 116.22312 Manual Del Propietário

The vacuumcleanercreatessuctionthat
picksup dirt.Rapidlymovingaircarries
the dirt to the dustbagthroughthe
airflowpassages° The dustbaglets
the air passthrough,whileit traps
the dirt.
Forbestcleaningresults,keep
the airflowpassageopen.
Checkthe starredareas
occasionally f or clogs_
Unplugfromoutlet
beforechecking,
Motor
Safety
Filter
BAG CHANGING
For best cleaning results, the dust bag
should be changed often. The performance
indicator (some models) will specify when
the dust bag needs to be changed or the
airflow is blocked. NOTE: See PARTS AND
FEATURES for Bag Number.
4. Disengage
cardboard tab from
red bag mount by
purling away and
lifting up_
5. Pull bag out of
the red bag mount.
1. Unplug cord from
wall outlet°
2. Remove hose
from canister,
3, Pull hood release
out and up, then lift
canister hood.
6, Check and
replace, if
necessary, the
motor safety
filter.
7. The red bag mount will flip forward after
removing bag.
8, Rotate red bag
mount down and
install bag into
slots per
intructions
pushing down until
the cardboard tab "_
locks into position
and the holes
align. Tuck the bag
securely into the bag cavity so that none of it
is able to be pinched by the hood.
9. Replace and latch canister hood.
10. insert hose into canister.
11. Plug cord into wall outlet.
CAUTION .........................
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet fresh-
ener, face powder, fine dust, plaster,
soot, new carpet lint, etc. can clog
the bag and cause it to burst before
it is full and may cause damage to
vacuum motor. Change bag more
often when vacuuming these materi-
als.
12