OK. OPD 400 Manual De Instrucciones página 51

auDI� setuP
Downmix setup: To set front speakers to Lt/Rt STEREO or 5.1CH.
• The first 2 settings (Lt/Rt, STEREO) downmix the sound Signal for 2-Speakers. This setting allows you to enjoy a
surround sound effect with onIy two speakers. For this reason a setup for additional speakers is disabled when
DOWNMlX MODE is set to these settings.
• You have to set the DOWNMlX MODE to 5.1CH if you have selected the Dolby Digital connection and you would like
to enjoy true Dolby Digital surround sound. In this setting, the CENTRE, REAR speakers are active.
Front speaker: To set front speakers volume Large, Small.
centre speaker: To set centre speakers volume Large, Small or Off.
rear speaker: To set rear speakers volume Large, Small or Off.
subwoofer speaker: To set subwoofer speakers On or Off.
sFDIF �utput: To set the audio outputs. Under the status of SPDIF/RAW, volume can only be adjusted for MP3
format, but not for DVD/CD. SPDIF stands for Sony Philips Digital Interface Format.
This DVD player includes three kinds of audio outputs:
1. SPDlF OFF: An analog surround sound format output through the back-paneI connections for L, R.
2. SPDlF/RAW or SPDIF/PCM: This surround sound format output to a Dolby Digital decoder through for the
coaxial connectors on the back panel of the product.
n�te: The DVD player simultaneously outputs a Dolby Digital signal and an analog signal, but you have to
select the Analog output if you want to take advantage of the Karaoke effects.
lPcn (linear Pulse code Modulation) �utput: Includes LPCM 48K, LPCM 96K for audio format.
51
– speaker setup
– sPDIF setuP – sPDIF �utput
– lPcM �ut
– Downmix
– Front speaker
– center speaker
– rear speaker
– subwoofer
en