Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6.2.
TOUCHSCREEN PANEL - INDOOR UNIT MANAGEMENT WINDOW
From the main monitor screen (explained in section 6.1), pressing any
icon representing one of the system's indoor units, accesses the spe-
cific Monitor of the selected indoor unit; All parameters and functions
of the selected indoor unit can be set through this new page as shown
in the following figure:
4
Alarm Key function or description of the information:
Indicates the label assigned to the selected indoor unit; Press this button to exit the window and return to the main
1
monitor
Indicates the current temperature setpoint set on the indoor unit; if pressed, displays the room temperature detected by the
2
probe related to the selected indoor unit
3
Pressing this button increases the set temperature setpoint
4
Pressing this button decreases the set temperature setpoint
This icon indicates the current operating mode set on the selected unit:
5
Auto(
), Cooling (
6
Pressing this icon switches the indoor unit ON or OFF
7
Press this key to activate the selection window for the time schedule to be assigned to the selected indoor unit
8
Pressing this icon activates or deactivates the automatic horizontal swing (if available)
9
Pressing this icon activates or deactivates the automatic vertical swing (if available)
10
The fan speed can be set by pressing and dragging the slide
11
The operating mode can be selected by pressing one of the icons in the Circular menu
Pressing this icon activates the advanced settings window for the selected indoor unit (the functions available through
12
this window will be explained on the next page)
32
1
11
10
), Dehumidification (
), Ventilation (
WARNING:
The status of the functions is represented by
the colour of the relative icon:
• Bright colour: Function ENABLED;
• Faded colour: Function DISABLED;
(Each type of indoor unit can have functions
not available on others);
2
9
8
7
), Heating (
)
12
3
5
6
Publicidad
Tabla de contenido
