Virutex CE120P Manual De Instrucciones página 6

2. SPECIFICATIONS
Input power...............................................750 W
Motor.....................................................50/60Hz
No load speed...................................13,000/min
Cuts per minute.........................................26,000
Cutting width............................................82mm
Cutting depth...........................................0-4mm
Rabbeting depth........................................25mm
Weight..................................................3.750 Kg
Weighted equivalent continuous
acoustic pressure level A.......................................86 dBA
Acoustic power level A............................................97 dBA
Uncertainty............................................................K = 3 dbA
Wear ear protection!
Vibration total values........................................a
Uncertainty...........................................................K: 1.5 m/s
3. STANDARD EQUIPMENT
Inside the box you will find the following components:
1. Planer CE120P
2. Lateral fence
3. Spanner for fixing blades (a/f 8)
4. OPTIONAL ACCESSORIES AND TOOLS
2040147 Set of hard metal reversible straight CE120P
blades (included in equipment)
2031078 Set of HSS reversible straight CE120P blades
3599101 Standard blade-holder
2031081 Set of HSS straight 3-mm blades with holder
2031082 Set of HSS straight 3-mm with holder
2031080 Set of 2 HSS reversible straight thickness
= 3-mm blades
2031079 Set of 2 HSS reversible rustic e= 3-mm blades
2045381 Adjustable lateral fence CE120P/GR120P
This accessory enables the user to work with a large
lateral guide and to obtain chamfered edges of
varying degrees (Fig. 28 and 29).
5. GENERAL DESCRIPTION
The Planer CE120P comes equipped with:
• Reversible HM blades
• Cutting regulator with automatic locking, for planer
width of up to 4 mm
• Regulable lateral shoe for rebate depth of up to
25 mm
• Sliding horizontal guide for planing overlaps of
0-1 mm
• Lateral fence for work to be done on the edge of
6
the workpiece
• Collector outlet can be placed on the right or left side
• Safety switch A (Fig. 1) with inverted locking B
(Fig. 1) for right-handed or left-handed users that
prevents the machine from starting accidentally
• Lateral blade guard
• Concealable rest shoe, to prevent the blade from
coming into contact with the workpiece once the
planer is switched off
• Blade-holder equipped with mechanical brake
system.
6. CUTTING CONTROL
Cutting depth
Turning knob C (Fig. 2) clockwise regulates cutting.
The knob's locking screws enable planing width ad-
justment to be carried out in 0.2-mm steps. Maximum
: <2.5 m/s
2
cutting depth is 4 mm.
h
2
Planing of rebates and overlaps
Rebate depth is set by means of the parallel shoe D
(Fig. 2). The shoe is placed at the desired height by
simultaneously pressing and turning the knob E. When
the knob is released the shoe remains fixed in the
desired position. Maximum rebate depth is 25 mm.
The planer CE120P enables one to plane overlaps (Fig.
3), thanks to its sliding guide F (Fig. 3). This permits
cutting from 0-1 mm by means of the regulation of
the screw G (Fig. 3, 4). Always remember to have a
good support for the planer base.
Lateral fence
The lateral fence H (Fig. 2) enables you to position
the planer for work to be done on the side of the
workpiece. To attach it, push lever I (Fig. 2) and slide
the square by means of the hole J (Fig. 4) to the desi-
red measurement. When the lever I is released, the
parallel square will remain locked in this position. If
need be, a more precise regulation can be obtained
using the bracket K (Fig. 2).
Chamfering the edges
To chamfer the edges of a workpiece quickly and easily,
place the front groove of the centre of the planer
shoe onto the workpiece edge and guide the planer
forward evenly, maintaining an angle of 45º (Fig. 4).
7. CHIPS OUTLET
The chips outlet can be shifted to the right (normal
position) or left by placing the lever L (Fig. 1) facing
the side you have selected.
Allows the connection of the Virutex dust collector