Installation; Installing The Sim Card And Battery - Doro PhoneEasy 410s gsm Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Warning!
Turn off the phone and disconnect the charger before
removing the battery cover .

Installing the SIM card and battery

The SIM card holder is located behind the battery.
1 . Remove the battery cover by pressing it carefully down and
sliding away from the emergency call key.
2 . Remove the battery if it is already installed.
3 . Press lightly on the cardholder and carefully slide it towards
the emergency call key.
4 . The SIM card holder can now be folded into an upright
position.
5 . Placing the SIM-card on the marked area of the
compartment. Make sure that the SIM card's contacts are
facing downwards and that the cut-off corner is placed
accordingly with the marked area. See picture. Take care not
to scratch or bend the contacts on the SIM card.
6 . Fold the SIM-card holder down and carefully slide it away
from the emergency call key until it "clicks" into place.
7 . Insert the battery by sliding it into the battery compartment
with the contacts facing towards the emergency call key.
8 . Replace the battery cover until it "clicks" into place.
English

Installation

3

Publicidad

Tabla de contenido
loading

Tabla de contenido