Intended Use; Technical Data - Bosch UniversalChainPole 18 Manual Original

OBJ_BUCH-3155-002.book Page 18 Wednesday, February 28, 2018 10:04 AM
18 | English
 Ensure replacement parts fitted are Bosch-approved.
 The pole pruner should be stored in a dry, locked up
location out of the reach of children.
Symbols
The following symbols are important for reading and
understanding the operating instructions. Please take note of
the symbols and their meaning. The correct interpretation of
the symbols will help you to use the machine in a better and
safer manner.
Symbol Meaning
Reaction direction
Movement direction
Switching On
Switching Off
Accessories

Intended Use

The machine is intended for domestic use, for pruning trees
and shrubs at elevated height, while the user is situated on
the ground. The machine is not intended to cut inorganic
material or to be used on a ladder or steps.This tool is not
intended for commercial or industrial use.
Delivery Scope (see figure B)
Carefully remove the machine from its packaging and check if
the following parts are complete:
– Pruner head
– Telescopic handle
– Battery pack**
– Battery charger**
– Harness
– Chain guard
– Operating instructions
– Hex key screwdriver
– Saw chain oil
When parts are missing or damaged, please contact your
dealer.
** country specific
Product Features (see figure A)
The numbering of the product features refers to the
illustration of the machine on the graphics page 356.
F 016 L81 582 | (28.2.18)
1 Saw chain
2 Chain bar
3 Oil filler cap
4 Pivoting head adjustment buttons
5 Chain tensioning screw
6 Connector
7 Telecopic tube
8 Telecopic heigh adjustment
9 Front handle
10 Front handle harness loop
11 Harness
12 Extended gripping area (isolated)
13 Main handle harness loop
14 Locking button
15 Main handle (insulated gripping surface)
16 On/Off switch
17 Battery pack
18 Battery unlocking button
19 Hook to front handle harness loop
20 Hook to main handle harness loop
21 Oil tank inlet/outlet
22 Cover
23 Drive sprocket
24 Guide fin for chain bar
25 Fixing screws
Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Cordless pole pruner
Article number
Chain speed (no-load)
Chain bar length
Max diameter of cut
Chain type
Drive link thickness
Drive link count
Oil reservoir capacity
Automatic chain oiler
Height adjustment
Pivoting head, 9 positions
Weight according to EPTA-
Procedure 01:2014
Serial number
UniversalChain-
Pole 18
3 600 HB3 1..
m/s 4.0
cm 20/ 8"
cm 15
3/8" – 90PX033E
mm 1.1
33
ml 60

m 2.1–2.6
° 120
kg 3.6
See serial number (type
plate) on the machine
Bosch Power Tools