FAQ
If the device produces an abnormal sound:
•
Remove the 4 screws indicated below. These screws
are intended to fasten the pump during transport of
the equipment. It might disrupt the correct pump
vibration during operation and for that reason will
increase the noise of the device.
MAINTENANCE
•
The filter in container #1 prevents micro crystals
entering the suction circuit of the equipment. 4
replacement filters are delivered. To replace the filter,
unscrew the cap of the container stand, remove the
old filter, insert the new filter and screw the cap
holder.
•
Clean and disinfect the handle and after each
treatment. It is recommended to dip first ultrasonic
sterilizer and subsequently in an ultraviolet sterilizer.