DMG TempoCemNE Instrucciones De Uso página 11

Attach mixing tip
1. Remove the cartridge cap [D] or used mix-
ing tip by turning it 90° counterclockwise,
and discard it.
2. Attach a new mixing tip [E].
Please note: Make sure that the notches on the
mixing tip line up with those on the cartridge.
3. Turn the mixing tip clockwise 90° to lock it.
Apply material
When using a cartridge for the first time,
squeeze out a pea-sized amount of material
and discard it.
The material is mixed in the mixing tip by
pulling the trigger [F] of the Automix dispens-
er and it is then applied directly.
Please note: After the application, leave the used
mixing tip on the cartridge to cap unused mate-
rial!
12
Remove cartridge
1. Push up the lever [A] at the back of the Auto-
mix dispenser and pull back the slide [B]
completely.
2. Lift up the plastic lever [C] and remove the
cartridge.
Using the Smartmix Injector
1. Before putting on the mixing cannula,
remove the cap [A] or used mixing tip after
twisting it 90° counterclockwise, and then
discard it.
A