Weekly Activation Mode - Cepex CPC004 Instrucciones De Instalación Y Operación

PROGRAMING
Programing the start hour of the irrigation (in weekly activation mode)
In this operation it is possible to set for each program (A, B, C) up to 4 different start times a
day.
At each start time the first valve selected for the program will be activated and thereafter the
other valves will be opened in numbered sequence.
• Switch the selector to start-time mode. START I will appear on the display with the weekly
activation mode device –
• Press – – and the data on the display will flash.
• Set the desired start hour with the aid of
• Repeat the operation for programing START 2, 3, 4 II, III, IV if you so wish.
• To cancel a particular start, select it with the aid of the –
The hourly digits will flash. Press
Allocating the valves to a program and setting the duration of irrigation for each valve
– is identical for all modes of activation. See page 18
– and the word OFF or the last start hour that was entered.
– or – . (Notice the AM or PM signs).
– or – until the word OFF appears on the display.
– and press – .
1 6
EN