Troubleshooting; Guarantee - Dometic COOLFUN CK40D Hybrid Instrucciones De Uso

CK40D Hybrid
8

Troubleshooting

Problem
Your device is not
working (plug is
inserted).
When operating from
the DC socket
(cigarette lighter):
The ignition is on and
the cooler is not
working.
9

Guarantee

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see dometic.com/dealer) or your retailer.
For repair and warranty processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
EN
Possible cause
There is no voltage flowing
from the DC socket
(cigarette lighter) in your
vehicle.
No voltage present in the
AC voltage socket.
The inner fan or the cooling
element or the compressor
is defective.
The fuse of the DC plug is
dirty. This results in a poor
electrical contact.
The fuse of the DC plug has
blown.
The vehicle fuse has blown. Replace the vehicle's DC socket fuse
Troubleshooting
Suggested remedy
The ignition must be switched on in
most vehicles to supply current to the
cigarette lighter.
Try using another plug socket.
This can only be repaired by an
authorised repair centre.
If the plug of your cooler becomes
very warm in the DC socket fitting,
either the fitting must be cleaned or
the plug has not been assembled
correctly.
Replace the fuse of the DC plug with
one of the same rating (fig. 3 1,
page 3).
(usually 15 A). (Please refer to the
operating manual of your vehicle.)
13