Handy Duo_de.book Seite 13 Montag, 15. März 2010 11:27 11
2 Unpacking / Connecting
2
Unpacking / Connecting
2.1 Unpacking
Unpack the appliance and all accessory parts
and check that the contents are complete.
ATTENTION:
Always transport/send the appliance in its
original packaging so that it does not
become
damaged.
material for this purpose.
Dispose of any packing material that is no
longer required in accordance with the
provisions applicable in your country.
NOTE:
If you should notice damage due to
transport,
then
contact
immediately.
2.2 Assembly
1. Insert the battery powered hand-held
vacuum
cleaner
charging station (Fig. 3/2).
2. Stow
the
accessories
storage in the accessories containers
(Fig. 1/2) as shown.
2.3 Charge the battery
ATTENTION:
Only use the charger supplied with the
appliance for charging the battery. If this
condition is disregarded, the appliance may
incur damage or the batteries may be
severely damaged.
The battery must be charged before being
able to work with the appliance. To do this:
1. First connect the power unit to the
charging station (Fig. 3/3).
2. Then plug the power unit into the socket
(Fig. 3/4). The charging light (Fig. 1/1) is
illuminated red.
3. Now leave the battery to charge for 14-16
hours.
Keep
the
packing
your
dealer
(Fig. 3/1)
into
the
(Fig. 1/4)
for
ATTENTION:
Avoid longer charging times. These shorten
the operating life of the battery. If this
condition is disregarded, the appliance may
incur damage or the batteries may be
severely damaged.
4. After charging, pull the power unit out of
the socket first and then out of the
charging station.
NOTE:
Only recharge the battery again if it is
completely dead. This will increase its
operating life.
2.4 Using other nozzles
(accessories)
The battery powered hand-held vacuum
cleaner can be used for many different
purposes when combined with the nozzles
included in the scope of delivery and both
insert tubes (Fig. 4/2).
WARNING:
Switch the battery powered hand-held
vacuum cleaner off before assembling or
removing the accessories.
You can simply push the accessory into
the suction nozzle (Fig. 4/1) and combine as
required (Fig. 4).
Use the accessories as follows:
- Furniture brush (Fig. 4/3)
Use this to vacuum dust off objects that
have
sensitive
surfaces
cupboards, doors).
- Floor nozzle (Fig. 4/4)
This is suitable for vacuuming carpets
and hard floors. Combined with the two
insert tubes, you can use the Handy
Duo like a cylinder vacuum cleaner.
- Crevice nozzle (Fig. 4/5)
Use this to vacuum dust from hard to
reach places.
(e.g.
13