Electric Connections; Auto-Reset Thermal Protective Device - Mvac M35 Manual De Instrucciones

There should be an electric outlet within 1 meter (3 feet) of your central
vacuum unit. Once the appliance is installed in a suitable location, connect your
power unit to an electric outlet on an dedicated* grounded circuit. Do not use
extension cords or modify the length of your vacuum cleaner's power cord.
DEDICATED* GROUNDED CIRCUIT
• North America
120 V - all models : 15 A
• European continent and others
240 V - M35, M75: 8 A
240 V - M85: 10 A
Your central vacuum cleaner has a thermal safety device or a circuit breaker to
protect against any over voltage or electrical defect. If that protection should
fail, contact your authorized service center.
* Please reserve a circuit breaker dedicated only to the connections for your
central vacuum.

AUTO-RESET THERMAL PROTECTIVE DEVICE

This appliance is provided with an auto-reset thermal protective device to
protect the motor in the event of overheating. If the appliance should turn off
unexpectedly, turn the unit off to allow the motor to cool down, check for full
and/or clogged condition and wait twenty minutes before restarting. If the unit
continues to turn off unexpectedly, contact your nearest service center.
If you find that installing your vacuum cleaner is too difficult, ask your
service center to install it for you. When in doubt, it is better to have
the work done by a professional and ensure that the unit is properly
installed. Any installation that does not comply with the specified norms
could alter or invalidate the warranty.

ELECTRIC CONNECTIONS

Installation
7