Safety Instructions - RSLAB LJL002 Manual De Uso

Rocking Shaker & 3D Shaker

1. Safety Instructions

Warning!
•
Read the operating instructions carefully
before use.
•
Ensure that only trained staff works with the
instrument.
Protective ground contact！
•
Ensure the socket must be grounded
(protective ground contact) before use.
•
When working wear personal safety guards to avoid
the risk of:
-
Splashing liquids
-
Broken glass containers
•
Follow the safety instructions, guidelines and
accident prevention regulations.
•
Do not touch the running parts, moving instrument
care not rolling your fingers.
•
Set up the instrument in a spacious area on a stable,
clean, non-slip, dry and fireproof surface. Do not
operate the instrument in explosive atmospheres,
with hazardous substances or under water.
•
If the instrument does not run smoothly, please
decrease the motor speed.
•
Firmly secure the accessories and vessels in place to
avoid damage or risk.
•
Preparation of samples may lead to dangerous
flammable. Only process samples that will not react
dangerous.
•
Use the standard accessories listed in the
"accessories" section, and follow the instructions to
use accessories to ensure safety. Please switch off the
power before assembly of accessories, confirm the
instrument and accessories are intact before switch
on each time.
•
The instrument only be opened by expert，please
switch off before use.
•
The voltage stated on the nameplate must correspond
to the mains voltage.
•
Do not cover the instrument during running. Prevent
the collision and extrusion to instrument and
accessories.
•
Keep away from high magnetic field.
13