TROUBLESHOOTING
The table below lists possible problems that you may encounter with your equipment. If the
problem is not listed or the corrective actions listed do not correct the issue please notify the
manufacturer.
Problem
Possible cause
The device cannot be
Check to ensure the correct
switched on.
polarity of the battery in the
container.
Poor imaging quality.
Check whether the eyepiece
and lens are appropriately ad-
justed. Ensure that the lenses
are not bloomed or dirty.
Multiple luminous or
The presence of such pixels
black points (pixels)
is due to the manufacturing
are visible on the
process used to create the
screen of the device.
matrix.
Solution
Check to ensure the battery is
not flat. Switch the device off and
then on again.
Either replace the batteries or
ensure they are inserted correctly.
Carefully clean the lenses with a
soft and lint-free cleaning cloth
(e.g. microfiber)
This is not a defect.
- 16 -
TECHNICAL DATA
Model
Night Vision 3.5x42 Digital
Visual magnification
3,5x
Objective lens diameter
42 mm
Resolution
34 l/mm
Field-of-view angle
8,75 / 100m
Resolution power of camera
500x582
Type of sensor
ICX-405AL (Sony)
Max. observing distance*
100 m
Dioptre correction
+/- 5
Working voltage
3V (1xCR123A)
Tripod thread attachment, inches
1/4
Video signal standard
CCIR (BW/PAL)
Operating temperature range
-10 °C bis ca. +45 °C
Operating time
(with/without infrared lighting)
9/5 Stunden
Batteries:
1xCR123A
Dimensions (L x B x H)
160 x 55 x 85 mm
Weight (with battery)
380 g
The exceptionally long service life of the installed LEDs means they need not be replaced.
Replacement of the LEDs is not possible due technical reasons!
*Maximum distance from which a person can be recognised under ideal observation conditions
(ideal observation conditions: no fog, dust etc.) with lighting of ¼ moon (0.05 lux).
Magnification and
Objective lens diameter
Article number
(1
battery
CR123A)
BRESSER NV
3.5x42 digital
Art. No. 18-77200
BRESSER GmbH
Gutenbergstr. 2
46414 Rhede
(1x CR123A)
DC: 3V
DC: 3V
- 17 -
GB/IE