If The Top Tire Bead Is Diffi Cult To Mount - Hofmann monty 1675 smartSpeed Manual De Operador

5.2.4
5.2.1-1
5.2.1-2
5.2.1 If the top tire bead is diffi cult to
mount
Option 1)
Use the easymont pro optional accessory, #MH310PRO.
Follow the separate instruction provided.
Option 2)
Follow these instructions using the optional bead clamp
MX (Fig. 5.2.4), #EAA0247G70A.
A. After installing, the bottom bead insert the tire
tool to the left of the bead head as shown (Fig.
5.2.1-1). To protect decorative rims use protective
sleeve p/n 0024180 (optional).
B. Step on the foot pedal to rotate the turntable
clockwise until the tire lever is tight against the
bead head (Fig. 5.2.1-1).
C. Using your right hand push and hold the tire bead
opposite the bead head into the rim drop centre.
D. Position the bead clamp MX #EAA0247G70A
(optional) to hold the tire bead into the rim drop
centre (Fig. 5.2.4).
E. As the turntable is turning use the tire tool in your
left hand to raise and guide the tire bead onto the
bead head (Fig. 5.2.1-2).
F. Continue to rotate the turntable until the top bead
is mounted.
Do not remove the tire tool or bead clamp until the foot
pedal is released.
21
EN -