Accessmatic Viper 100 Manual De Usuario página 29

Opening your life
1. Receiver has been built-in only need remote to approve the always open, automatic, open one time, full lock function, and also t with
wireless push button PB04 to open the door, when controller is full lock, PB04 still can active the door.
2. Exit only function: Connect outside sensor or button to terminal "Open-B", connect inside sensor or button to terminal "Open-A". Then
press "full lock" button on remote.
3. ln double open mode: connect Synchronous line refer to the manual. power on, make sure the setting is same If open and dose speed
is not same, please adjust open /close speed, open/close bu er speed, open hold time.
4. When double open, the transmitter should learn both operators together. 5.ln double open mode, accessories should connect to both
controllers C parallel connection)
12