Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CABLE TV CONNECTIONS
This TV/VCR has an extended tuning range and can tune most cable channels without using a Cable TV
converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled.
Descrambling these signals for normal viewing requires the use of a descrambler device which is generally
provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a Converter/Descrambler box,
connect the CABLE TV 75 ohm Coaxial Cable directly to the Antenna
Jack on the back of the TV/VCR.
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the incoming
75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable, connect the output jack
of the Converter/Descrambler box to the Antenna Jack on the TV/VCR. Follow the connections shown below. Set the
TV/VCR to the output channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/
Descrambler box to select channels.
Incoming 75 ohm
CABLE TV cable
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a Converter/Descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the
Cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B"
position, you can directly tune any nonscrambled channels on your TV/VCR. With the switch in the "A" position, tune
your TV/VCR to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/
Descrambler box to tune scrambled channels.
Incoming 75 ohm
CABLE TV cable
SETTING THE LANGUAGE
This TV/VCR can display the on screen language in
English, Spanish or French.
On-screen language selection (step 3) will automati-
cally appear on the screen when you press the MENU
button initially. Select the language you prefer first,
then proceed with the other menu options.
1
Press the MENU button.
Press the B or A button to
select
option.
5M10421A E P10-17
Converter/Descrambler
Converter/Descrambler
A/B Switch
Splitter
2
3
CH
LANGUAGE/
IDIOMA/LANGUE
PICTURE
PICTURE PREFERENCE
4
/
/
/
/ MENU
11
75 ohm
Coaxial Cable
75 ohm Cable to TV/VCR
75 ohm cable
to TV/VCR
A
B
Press the
or
button to
select the LANGUAGE option,
then press the
button.
A
Press the
or
button to
select the desired language:
English (ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press the
ENTER button.
Press the MENU button until the
MENU screen is cleared.
26/5/04, 10:44
Antenna Jack
ANT.
Antenna Jack
ANT.
Antenna Jack
ANT.
CH
LANGUAGE/
IDIOMA/LANGUE
PICTURE
PICTURE PREFERENCE
/
/
/ MENU
CH
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
/
/ ENTER/MENU
11
Publicidad
Capítulos
Tabla de contenido
