ONE-TOUCH TIMER
RECORDING ( OTR )
The One-Touch Timer Recording feature provides a
simple and convenient way to make a timed recording.
EXAMPLE: One-touch Timer Recording for 30 minutes.
1
Press the POWER button to turn on the TV/VCR.
2
Load a video cassette with the erase prevention tab in-
tact.
3
Press the SPEED button to
select the desired tape speed
(SP or SLP). SP or SLP will
appear on the screen.
4
Set the TV/CABLE option to the
appropriate setting (See page 15).
TV
- VHF/UHF channels
CABLE
- CABLE TV channels
5
Press the Direct Channel Selection buttons or CH M/
? button to select the channel to be recorded.
6
Press the REC/OTR button to
begin recording. Press the button
again to stop recording after 30
minutes. Each additional press of
the REC/OTR button will increase
recording time as shown below,
up to a maximum of 6 hours.
"OTR" will appear on the screen.
NOTES: • Press the REC/OTR
button to increase the
time needed for recording
(See the chart right).
• To cancel OTR, press
the STOP button.
• The TV/VCR channel
cannot be changed
during recording.
TIMER RECORDING
Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.
EXAMPLE: Program a timer recording for 23rd day, channel
007 (CABLE), 7:00 - 9:30 PM (Tape speed : SLP).
• Load a video cassette with the erase prevention tab
intact. The TV/VCR will automatically turn on.
• Set the TV/CABLE selection to the appropriate position
(See page 15).
1
Press the MENU button.
Press the B or A button to select
the
option.
2
Press the
or
button to select
the TIMER REC SET option, then
press the A button.
5M10421A E P18-25
TIMER RECORDING
3
Press the
select the program position, then
press the ENTER button.
4
Press the B or A button to select
the date, then press the
00 : 00 : 00 SP
5
Set the start time, end time, channel and tape speed as in
step 4, then press ENTER.
OTR 0 : 30
CH 012
6
To set the timer for another program, press the
button until the number of the second program
highlighted, then press the ENTER button. Repeat
INDEX
steps 4 to 5 to set the second program.
7
Press the TIMER REC button. The T-Rec indicator
will light. The Timer is programed, when the programed
Press
Recording time
time is reached, the recording is automatically started.
once
NORMAL REC
twice
0:30
3 times
1:00
To cancel timer recording, press the TIMER REC button
again and T-Rec indicator will go out.
4 times
1:30
5 times
2:00
6 times
3:00
7 times
4:00
8 times
5:00
NOTES: • If programming is performed without a tape in
9 times
6:00
10 times
NORMAL REC
CH
TIMER REC SET
AUTO REPEAT
ON
/ / MENU
/
21
or
button to
button.
CH
2 3 T H
Ð Ð Ð Ð Ð
TIMER REC SET
Ð Ð Ð Ð Ð
DATE
23(THU)
Ð Ð Ð Ð Ð
START
7 : 00PM
Ð Ð Ð Ð Ð
END
9 : 30PM
Ð Ð Ð Ð Ð
CH
007
Ð Ð Ð Ð Ð
SPEED
SLP
Ð Ð Ð Ð Ð
/ / ENTER/CANCEL/MENU
/
/
/
/ ENTER/MENU
the TV/VCR, or with a tape without an erase
prevention tab, the Timer Recording is not
possible. If a tape without an erase prevention
tab is in the TV/VCR, the tape will be ejected.
• To record from the external equipment press
the B or A button repeatedly until "L" (LINE:
from AUDIO/VIDEO IN jack on the front)
appears when setting the channel in step 5.
• The VCR section cannot be used while the
T-Rec indicator is lit. If you want to use the
VCR operation, press the TIMER REC button
to deactivate the timer.
• After a power failure or disconnection of the
power plug, all programmed recording setting
and time display will be lost upon resumption of
power. In this case, reset the clock (see page
13) and reprogram any timer recordings.
• If you want to correct the digits while setting,
press the
or
button until the item you
want to correct, then press the B or A button to
correct the desired setting.
26/5/04, 10:45
Ð Ð Ð Ð Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð Ð Ð Ð Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð Ð Ð Ð Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð Ð Ð Ð Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð Ð Ð Ð Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð Ð Ð Ð Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð Ð Ð Ð Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð Ð Ð Ð Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
/ / ENTER/MENU
CH
TIMER REC SET
DATE
23(THU)
START
8:30AM
END
– – : – –
CH
012
SPEED
SP
/
/
/
/ MENU
7 : 0 0PM
9 : 3 0PM 0 0 7
SLP
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
Ð : Ð Ð
Ð : Ð Ð
Ð Ð Ð
Ð
or
21