ForaCare Test N' GO Manual Del Usuario página 13

NOTE:
This step is recommended when the user needs to pair this meter to a Bluetooth
receiver for the first time, or when user needs to pair this meter to another new
Bluetooth receiver.
faster. Press SET to confirm and go to the
next alarm setting.
If you do not want to set an alarm, press
SET to skip this step.
If you want to turn off an alarm, find
the alarm number by pressing SET in
the setting mode, press Main button to
change from ON to OFF .
6. Enter the Bluetooth pairing
With the no symbol flashing on the
display, press SET to skip the pairing.
If you wish to enter the pairing mode,
press Main button once and the meter
will display yes . Then press SET to
confirm and the meter will show CLr .
The meter will then automatically turn
off and the Bluetooth indicator will start
blinking, which means the meter is in
the process of pairing with a Bluetooth
receiver.
13