Radio Operation; Program Function - Trevi HCX 1030 S Manual De Usuario

ENGLISH

RADIO OPERATION

1. Turn on the unit and press the FUNCTION button (6) until the FM indication appears on the display.
2. Press the TUN + (16) or TUN- (15) buttons once to increase or decrease the frequency of 0.05MHz.
3. Press and hold the TUN + (16) or TUN- (15) buttons for tuning to the next or previous radio station.
4. Press the PLAY / PAUSE button (17) on the remote control unit or button (12) to start automatic radio station search. The unit
can store up to 20 radio stations.
5. Press the M .- (9) or M. + (10) buttons once on the remote control unit or the MEM- (6) or MEM. + (15) buttons on the remote
control to move to the previous or next station.
6. To store a radio station press the MEMORY button (2) on the remote control and use the MEM .- (6) or MEM + (15) keys to
select the memory number in which you want to save the radio station and press again the MEMORY key (2).
7. Press the MO / ST button (16) on the remote to switch from stereo to mono if supported by the tuned radio station.
Note: To get the best FM reception, extend and orient the antenna. If reception is not good, try adjusting the length and orientation of the antenna
differently, however the quality of FM reception depends very much on where the unit is located.
CD-MP3 PLAYER OPERATION
1. Turn on the unit and press the FUNCTION button (6) until the CD indication appears on the display.
2. Open the CD compartment by pressing the OPEN / CLOSE button (19) and insert the disc with the side facing up. Close the
door by gently pressing.
3. After a few seconds the display will show the number of tracks on the disc and playback will start automatically.
4. Press the PLAY / PAUSE button (17) on the unit or the PAUSE (12) button on the remote control to activate the pause, the time
display on the flashing display. Press the button again to turn off the PAUSE.
5. Press the STOP button (5) to stop the playback.
6. If you have MP3 folders with multiple folders, press the FOLD keys. + and - (10 and 9) to select the different folders to play.
PREV/NEXT SONG SELECT AND FAST SEARCH
1. Press the PREV (15) or NEXT (16) buttons once to move to the previous or next track.
2. Press the PREV (15) or NEXT (16) button for a long time while listening to quickly search for a particular music passage.
REPEAT
Press the P-MODE button (8) on the remote until the icon
Press the P-MODE button (8) on the remote until the
play back all the tracks in the folder being played.
Press the P-MODE button (8) on the remote control until
Press the P-MODE button (8) on the remote until the INTRO indicator appears on the display to play the first 10 seconds of each
track on the disc.
Press the P-MODE button (8) on the remote control until the RAN indication appears on the display. The unit will start playing
random tracks on the disc.
Press the P-MODE button (8) several times until any icon / text in the display disappears to cancel the repeat function.

PROGRAM FUNCTION

Playback according to user-set programming.
1. If the CD is playing, stop it by pressing the STOP button (5).
2. Press the MEM key (6) or MEMORY button (2) on the remote control, P ---- will appear on the display.
3. Select the track number you want to play using the PREV (15) or NEXT (16) buttons. P01xx will appear on the display, where
P01 indicates the position of the track in the sequence to be played and xx indicates the track zero.
4. Confirm with the MEM key (8) or the MEMORY (2) key on the remote control and continue inserting more tracks, up to a maximum
of 20 tracks (99 with MP3 disc). The display will show in sequence P01xx, P02xx, P03xx, and so on.
5. Press the PLAY / PAUSE button to start the programmed playback.
6. Press the STOP button to stop playback, press it again to disable program function.
USB INPUT OPERATION
REPRODUCTION
1. Connect a USB memory device to the USB port (13).
2. Turn on the unit and press the FUNCTION button (6) until the USB display appears on the display, playback of tracks from the
USB device will start automatically.
Notes: The player may not support some USB devices, this is due to the incompatibility of some processors.
3. For the rest of the functions refer to "PLAYBACK CD-MP3 PLAYBACK".
appears on the display to play the same track continuously.
DIR indication (MP3 disc only) appears on the display to continuously
ALL is displayed to continuously play all the tracks in the display.
HCX 1030 S
11