Assembling The Vacuum Cleaner; Cleaning And Care - OK. OVC 3115 A Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 11

ASSEMBLING THE VACUUM CLEANER

Fig. 1
Insert the suction hose into the hose connection and rotate it to the right (bayonet lock).
Make sure that it has clicked into place.
Place the floor nozzle on the lower end and the suction tube handle on the upper end of the
Fig. 2
telescopic tube.
Fig. 3
Adjust the telescopic tube to the desired length by pressing the locking mechanism down
and then pushing the telescopic tube out or squeezing it together.
USE OF THE ACCESSORIES PROVIDED
Floor nozzle
To vacuum hard floors, press the toggle switch down.
Fig. 4
To vacuum carpeted areas, press the toggle switch again in order to retract the brushes.
Dusting nozzle / Crevice nozzle
For vacuuming upholstered furniture, mattresses, cushions, curtains, etc.
Fig. 5
For vacuuming folds, crevices and corners.
OPERATION
Pull out the connection cable to the desired length and insert the power plug into a
Fig. 6
receptacle.
Fig. 7
Press the On/Off switch to turn the vacuum cleaner on/off.
Tip: If the vacuum can only be guided with difficulty over carpeted areas due to excessively
high suction power, adjust the suction power down by opening the auxiliary air flap on the
handle.
Fig. 8
Switch the vacuum cleaner off after use and unplug it when you have finished working.
Wind the power cable around the cable storage device by pressing the automatic cable
retraction switch. While you are doing this keep the cable taut, if possible.
Parking system for pauses in vacuuming
You can store the telescopic tube with the combination nozzle on the vacuum cleaner.
Fig. 9
Transport
Fig. 10
To carry your vacuum cleaner take it at carrying grip.

CLEANING AND CARE

Warning!
When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp
objects. Solvents are harmful to human health and can attack plastic parts, while abrasive
cleaning mechanisms and tools may scratch the surface(s).
Warning!
Never immerse any electrical parts of the product in water or in other liquids during
cleaning. Never place it under running water.
IM_OVC3115A-180103_V06_HR.indb 9
9
En
3/1/18 6:37 pm

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido