Operation - Hilti VC 40 Manual De Instrucciones

Ocultar thumbs Ver también para VC 40:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 82
3. Remove the accessories and packaging
from the waste material container.
NOTE Use the class M version for picking
up dusts with an exposure limit value of ≧
0.1 mg/m³. Fit a filter fleece or plastic dust
bag for mineral dust or a paper dust bag
for wood chips or shavings in the container
en
in accordance with the instructions.
NOTE When used to pick up harmless
dusts: Fit a plastic dust bag in the container
in accordance with the instructions (see
printed instructions).
4. Fit the vacuum cleaner top section onto
the waste material container.
5. Close the two catches.
6. Check to ensure that the vacuum cleaner
top section is fitted correctly and secured.
7. Connect the suction hose to the appliance.
6.2.1 Fitting a paper dust bag for picking
up wood chips or shavings 3
1. Open the two catches.
2. Lift the vacuum cleaner top section away
from the waste material container.
3. Place the new paper dust bag in the waste
material container.
4. Fit the vacuum cleaner top section onto
the waste material container.
5. Close the two catches.
6. Check to ensure that the vacuum cleaner
top section is fitted correctly and secured.
7. Connect the suction hose to the appliance.

7 Operation

WARNING
For vacuum cleaners of the class M, please
note: Vacuum off the outer surfaces of the
appliance, wipe it clean or seal it in a suit-
able container or material before removing
it from an area contaminated with hazard-
ous substances. All parts of the appliance
must be regarded as being contaminated
when they are removed from the hazardous
area and suitable measures must be taken
to avoid spreading dust.
30
6.3 Power conditioner
CAUTION
When placing the power conditioner in the
cradle check that the power outlet faces
upwards and the spring catch engages.
CAUTION
To avoid injury, remove the power condi-
tioner and any loose accessories from their
attachment points before emptying the con-
tainer and before transporting the vacuum
cleaner.
6.4 Transport
DANGER
With vacuum cleaners of the class M, take
care to ensure that the hose socket cap is
fitted when the appliance is transported or
not in use.
DANGER
The appliance may be moved or transported
only when the motor has come to a complete
stop.
Do not carry the appliance when it is full of
waste material.
Empty the appliance before carrying it to an-
other location.
Do not tip the appliance or lay it on its side for
transport after using it to collect water.
The tapered adapter can be used to connect
both ends of the hose together for transport.
WARNING
In an emergency (e.g. burst filter), switch the
appliance off, disconnect it from the electric
supply and have it checked by a trained
specialist before further use.
CAUTION
For vacuum cleaners of the class M, please
note: CAUTION: This appliance contains
harmful dust. The vacuum cleaner may be
emptied (including disposal of the dust

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vc 20

Tabla de contenido