Troubleshooting; Cleaning And Maintenance - Fagor PL-200 Manual De Instrucciones

5. TROUBLESHOOTING

Problem
The steamer does not heat up
The steamer does not produce heat
Water spills from water tank
Pilot light goes "on" and "off"
The steamer produces a pumping sound

6. CLEANING AND MAINTENANCE

• Remove the fabric brush from its steam
head and clean using a damp cloth.
• Do not use harsh or abrasive cleaning
agents or solvents.
• Do not drop, throw or try to bend the
steamer.
• Do not attempt to disassemble you
product.
• Always empty the water tank after use
and rinse with clean water.
Possible Solution
Check main plug is inserted correctly. Check
power supply.
Check the water level and the water tank cover is
properly closed. Allow sufficient time for steamer
to heat up.
Press the steamer button harder. Hold the steamer
in upright position.
Make sure water is not over the "Max" level. Make
sure water tank cover is properly closed.
This is normal. The light goes "on" when steamer
is heating up and goes "off" when steamer has
heated and ready to use.
Check water level. Water needs to be refilled if it is
below the minimum or there is no water.
7. INFORMATION FOR THE CORRECT
DISPOSAL OF ELECTRICAL AND
ELECTRONIC APPLIANCES
At the end of its working
life, the product must not be
disposed of as urban waste.
It must be taken to a special
local authority differentiated
waste collection centre or
to a dealer providing this
service. Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate disposal
and enables the constituent materials to be
recovered to obtain significant savings in
energy and resources.
To remind you that you must collaborate
with a selective collection scheme, the
symbol shown appears on the product
warning you not to dispose of it in
traditional refuse containers.
For further information, contact your local
authority or the shop where you bought the
product.
11