Before Using Your Fridge; The Various Function And Possibilities; Thermostat Setting; Ice Box Tray - meireles MFF80W Manual De Instrucciones

Before Using your Fridge

• When it is operated for the first time or after transportation, keep
your fridge in the upright position for 3 hours and plug it on to allow
efficient operation. Otherwise, you may damage the compressor.
• Your fridge may have a smell when it is operated for the first time;
the smell will fade away when your fridge starts to cool.
PART -2

THE VARIOUS FUNCTION AND POSSIBILITIES

Thermostat Setting

• For short-term storage of food in the appliance, you can set the knob between minimum
and medium position. (1-3)
• For long-term storage of food in the appliance, you can set knop medium position. (3-4)
Note that; the ambiant temperature, temperature of the freshly stored food and how often the
door is opened, affects the temperature in the refrigerator compartment. If required,change
the temperature setting.
• When you first switch on the appliance, for starting a suitable cooling, the appliance
should work 24 hours continuously until it cools down to sufficient temperature.
• In this time do not open the door so often and place a lot of food inside the appliance.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting
or re-plugged the unit in order not to damage the compressor.
Important note: In product, the coldest region is just below the ice making compartment. In
this region, condensation may occur. Icing,frosting and condensation may occur ice making
compartment and other compartments. This is normal situation and does not affect cooling.
It can be wiped with dry cloth according to safety instructions.

Ice box tray

(In some models)
• Fill the ice tray with water and place in ice making compartment.
• After the water completely turned into ice, you can twist the tray as shown below to get
the ice cube.
Thermostat automatically regulates the
inside temperature of the refrigerator. By
rotating the knob from position 1. to 5.,
temperatures can be obtained.
Important note: Do not try to rotate
knob beyond 1 position it will stop your
appliance.
EN - 34 -