Preparing The Appliance For Operation; Vacuum Packing In Bags - Unold 48090 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
Copyright UNOLD AG | www.unold.de
21. Unplug the appliance from the power supply
after use and prior to cleaning. Never leave the
appliance unattended when it is plugged in to
the power supply.
22. Clean the appliance after every use (see chapter
on Cleaning and Care).
23. Check the appliance, the plug and the power cord
regularly for wear or damage. In case of damage
to the power cord or other parts, please send the
appliance for inspection and repair to our after
sales service. Unauthorized repairs can result in
serious risks to the user and void the warranty.
Never open the housing of the appliance. This can
result in electric shock.
The sealing gasket becomes hot during operation
of the appliance. Therefore, do not touch the
seal, since otherwise there is a danger of being
burned.
The manufacturer will not be liable in the event of improper or incorrect use or if
repairs are carried out by unauthorized third parties.

PREPARING THE APPLIANCE FOR OPERATION

1.
Remove all packaging material and any transport safety
devices.
2.
Clean all components with a damp cloth, as described in
the chapter "Cleaning and care".
3.
Place the appliance on a suitable level surface.
4.
Make sure that there is enough space in front of the appli-
ance for the bag to be vacuum packed.
5.
Connect the appliance via the power cord to the power
supply (AC, 220–240 V~, 50-60 Hz).

VACUUM PACKING IN BAGS

1.
Prepare the appliance as described in the section "Pre-
paring the appliance for operation" .
2.
Open the cover of the appliance. Check to make sure the
seal is inserted properly. If there are any foreign objects
such as crumbs on the seal, they have to be removed,
since otherwise no vacuum can be created.
3.
Fill the bag with the food to be vacuumed. For optimal
results, the bag should not be too full. Leave about 8 cm
between the contents and the edge of the bag.
4.
Place the open end of the bag in the middle of the vac-
uum packing chamber.
18

Publicidad

Tabla de contenido
loading

Tabla de contenido