Machine Components - Primo HSM 225.2 Instrucciones De Servicio

HSM 225.2

3 Machine components

1 2 3 4 5 6
1 Door
2 Paper feeding opening
3 Feed opening for disks and CDs
4 Safety instructions
5 LEDs
Paper shredder is ready for operation.
Paper jam or motor overloaded
Cut material container full or door open
6 Rocker switch
: On
: Off, Reverse
8
4 Operation
Switching the paper shredder on
• Press rocker switch
Rocker switch locks in place.
Green LED lights.
Paper shredder is ready for opera-
tion (standby).
Feed paper
• Insert the paper to be destroyed.
See „Technical data" for sheet
capacity.
The shredding pro cess is star-
ted by a pho to –cell in the paper
feeding opening.
Paper is pulled into cutting
system and shredded.
When the paper fee ding open-
ing is free again, the cut ting sy-
stem au to ma tical ly swit ches off
af ter app rox. 3 sec. and returns
to standby.
Shredding CDs and disks (see "Prop-
er Use")
Swit ching paper shredder off
• Tap rocker switch
Switch returns to ze ro po si ti on.
.
Feed CDs and disks
through the slot in the
safety element. This
protects you from splin-
ters.
.
0802