Installation Of Pull Bar - Accessmatic Viper 200 Manual De Usuario

6. Mechanical installation

6.4 Installation of pull bar

1.Open the door to 90°， slide the pull guide roller into track.
2.Fix the Pull bar plate as shown.
3.Move the plate ensure the wheel at the middle position of track as
shwon.
4.Hold the plate postion, x the rst screw near. Center of the shaft.
5.Close the door ,repeat step 3， x another screw at another side.
6.Manually move the door to ensure pull bar work smoothly，
adjustment is requested if any resistance during the operating.
7.Fix the last screw.
Opening your life
9