Weee Information; Technical Specifications - Dörr DRL-232 Manual De Instrucciones

07 | TAKING PICTURES WITH THE LED RING LIGHT
Switch your camera on after having mounted the ring light. Move the ring
light's main switch (2) to position ON.
We recommend to take pictures in aperture priority mode (A/Av) or ma-
nual mode (M), so you can select the desired aperture and the depth of
sharpness manually.
Depending on the object, the ambient light and the desired depth of sharp-
ness, the light intensity can be variably adjusted from 20% to 100% using
the brightness control (4).
For a three dimensional illustration with lateral shadow, the ring light can
also be positioned above or aside the lens. For attachment on a tripod, the
ring light boasts of a ¼" tripod socket (8) at the bottom. For an optimum
direction, use the supplied ball head (9).
After usage, set the main switch (2) to position OFF.
08 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We
recommend a soft, slightly damp microfiber cloth to clean the outer parts
of the device. Turn off the device and remove batteries before cleaning.
Store the device in a dust-free, dry and cool place. This device is not a toy
– keep it out of reach of children. Keep away from pets.

09 | TECHNICAL SPECIFICATIONS

Number of LEDs
Voltage
Output
Illumination
Colour temperature
Brightness control
Battery box
Alternative energy source
Measurements ring light
Measurements control unit
Measurements battery box
Weight
Weight battery box
10 | SCOPE OF DELIVERY
LED ring light with control unit
•
Battery box
•
each 1x adapter ring for Ø 52, 55, 58, 62, 67, 72, 77 mm
•
Ball head
•
Instruction manual
•
232
7,4 V
14 W
approx. 1800 Lux/1 m
5800 K ± 200 K
20% - 100%
for 6 Mignon AA batteries or
rechargeable batteries of the
same type (optional)
Li-Ion battery type Sony NP-F550/NP-
F750/NP-F970 (optional)
approx. 16 x 2,5 cm
approx. 9,5 x 6 x 4 cm
approx. 7 x 3,7 x 6,3 cm
approx. 300 g
approx. 62 g (w/o batteries)
11 | DISPOSAL, CE MARKING
11.1 DISPOSAL OF BATTERIES/ACCUMULATORS
Batteries are marked with the symbol of a crossed out bin. This symbol
indicates that empty batteries or accumulators which can no longer be
charged should not be disposed of with household waste. Waste batteries
may contain harmful substances that can cause damage to health and to
the environment. Please use the return and collection systems available in
your country for the disposal of the waste batteries.
11.2

WEEE INFORMATION

directive on waste electrical and electronic equipment, which became Eu-
ropean law in February 2003. The main purpose of this directive is to pre-
vent electronic waste. Recycling and other forms of waste recovery should
be encouraged to reduce waste. The symbol (trash can) on the product and
on the packing means that used electrical and electronic products should
not be disposed of with general household waste. It is your responsibility
to dispose of all your electronic or electrical waste at designated collec-
tion points. Disposing of this product correctly will help to save valuable
resources and it is a significant contribution to protect our environment as
well as human health. For more information about the correct disposal of
electrical and electronic equipment, recycling and collection points please
contact your local authorities, waste management companies, your retailer
or the manufacturer of this device.
11.3 ROHS CONFORMITY
This product is compliant with the European RoHS directive for the restric-
tion of use of certain hazardous substances in electrical and electronic
equipment and its amendments.
11.4 CE MARKING
The CE marking complies with the European standards and indicates that
the product meets the requirements of the applicable EU directives.
07