Bixpy Jet Manual De Usuario Y Guía De Seguridad página 6

CONNECTING YOUR THRUSTER TO YOUR ADAPTERS
Your Bixpy Thruster uses a simple latching mechanism to allow attachment of a variety of adapters
and, of course, the Bixpy HandHeld Power Pack for snorkeling and scuba diving. Follow the steps
below to connect your adapters or HandHeld Power Packs to your Thruster.
2
i.
1
ii.
iii.
Slide front nose latch (1) forward and insert metal toe (2) under the
nose latch (1).
Hint: Before this point, your connector should be fully and securely
mated. A poor mating could result in damage to your thruster.
Push the rear spring (3) on your adapter or HandHeld Power Pack
5 under the thruster's clasp (4).
Push up the blue latch (5) to securely lock your adapter to your
3
thruster.
4
Hint: your blue latch (5) may be tough to open with your finger. If
necessary, use a flat tip screwdriver to assist. BE GENTLE!
When opening your adapter, follow steps i. through iii. in reverse, for
your Adapters and i & ii on page 4, in reverse, for your connectors.
E
5