When The Work Is Done; Changing The Dust Bag - Siemens VR4.A Serie Instrucciones De Uso

en

When the work is done

6
Figure
Unplug the vacuum cleaner.
Wind the cord around the power cord
hooks at the rear of the vacuum cleaner.
7
Figure
a) The vacuum cleaner can be hung by
the handle for storage.
b) The carrying handle can be used to
transport the vacuum cleaner.

Changing the dust bag

Replacing the dust bag
If the suction capacity of the vacuum
cleaner diminishes noticeably,
the dust bag must be replaced.
8
Figure
Open the lid in the direction of the
arrow, lift it away from the vacuum
cleaner and set it down.
9
Figure
Seal the dust bag by pulling the
locking tab, remove it and insert a
new dust bag.
! Caution: The lid only closes with
the dust bag inserted.
After using the vacuum cleaner for
fine dust particles (such as plaster
or cement), clean the micro filter
and replace it if necessary.
Changing the micro-hygiene filter
The micro-hygiene filter should be
changed: each time you need to open
the replacement filter pack.
10
Figure
Open the lid (see Figure 8).
Pull the filter holder out and open it.
Dispose of the old micro-hygiene filter
and fit a new micro-hygiene filter.
Insert the filter holder into the vacuum
cleaner and close the lid
11