Removing The Hook Cover Plate; Inserting The Bobbin - Sears Kenmore 385.16765 Manual De Instrucciones

• Removing the hook cover plate

Hook cover plate release button
1
2 Hook cover plate
Slide the hook cover plate release button
and remove the cover plate

• Inserting the bobbin

1 End of thread
2 Notch
Notch
3
Threading diagram
4
Place a bobbin in the bobbin holder with the thread
1
running off counterclockwise.
2 Guide the thread into notch
the bobbin holder. Draw the thread to the left, sliding it
between the tension spring blades.
Continue to draw the thread lightly until the thread slips
3
into notch . Pull out about 6˝ (15.0 cm) of thread.
3
4 Attach the hook cover plate. Check the threading by
referring to the diagram
to the right,
1
.
2
on the front side of
2
shown on the hook cover plate.
4
1
1
2
3
3
4
24
1
2
2
1/8 3/8 5/8
10
4