Select User Language; Common Programming; Service In Use - Favero Electronics CT1X Manual De Uso

ENGLISH
If a prepaid card is placed on the reader area,
credit will be deducted from the card according to
the base amount (parameter P0.5, ch. 4.6).
Once these steps have been completed, press
to activate service.
The display will return to the initial wait mode.
Fig. 7: Insert amount

3.4 Service in use

If the accumulation of time option has been
activated (see ch. 4.7) it is possible to select a
service already in use in order to insert further
coins (or to read the prepaid card again) and
prolong the time.
The user will be notified that the service is in use
and of the time remaining (Fig. 8).
During selection, services in use will be
displayed after those currently available,
so as to
nonetheless (for example, to prolong the
time).
If it is not possible to select a service
already in use, activate the accumulation
of time as indicated in chapter 4.7.
Fig. 8: Service in use
00182-M01-02-ML - Manuale uso CTx
allow for their

3.5 Select user language

Press the
language to English, Italian, Spanish, French, or
German.
If by pressing the button the language
does not change, unblock the function as
indicated in chapter 4.2.
4 C
This chapter contains the common programming
steps for all services. Specific programming steps
for each service will be presented in the
subsequent chapter.
Useful examples for understanding the
available functions in the CTx are found in
ch. 7. If you are having difficulties, read
this chapter first.
To enter/exit the programming, open the CTx and
press the button indicated by the letters PROG. at
the back of the display. To start the programming,
none of the services should be in use or selected.
To stop and zero all services in use, keep
the PROG. button pressed down for 10
seconds. This is useful for testing the
zeroing of time for services.
To select the programming step desired, use the
selection
By holding down the
selected
decrease respectively.
4.1 P0.0 Select service language
Press the
language used in programming (Fig. 9).
Fig. 9: Select Language
Pag. 6 / 51
button to change the user
P
OMMON ROGRAMMING
and buttons.
parameter will
and
or button, the
quickly increase
buttons to change the
F E D
AVERO LECTRONIC ESIGN
or