Toasting Frozen Bread; Warming Up Already Toasted Bread - Grundig TA 8680 Manual De Uso

OPERATION ______________________________

Toasting frozen bread

1
Follow the steps from 1 to 4 at the "Toasting"
section.
2
Press the defrost button
– The indicator lights of the defrost button
and stop button
H
process begins.
Notes
When the defrost button
7
ing process takes longer than the normal toast-
ing.
Follow the steps from 5 to 6 at the "Toasting"
7
section.
Warming up already toasted
bread
1
Follow the steps from 1 to 4 at the "Toasting"
section.
2
Press the reheat button
– The indicator lights of the reheat button
and stop button
H
ing up process begins.
3
Follow the steps from 5 to 6 at the "Toasting"
section.
One-side heat button
1
Follow the steps from 1 to 2 at the ''Toasting''
section.
2
Press the one-side heat button
- The indicator light of the one side heat but-
ton and stop button
F
warming up process begins.
3 Follow the steps from 5 to 6 at the ''Toasting''
section.
Warming up buns
This toaster is equipped with an external warming
rack .
A
20 ENGLISH
.
I
illuminate and the toasting
I
is pressed, the toast-
.
G
illuminate and the warm-
.
F
illuminate and the
H
Notes
Do not toast bread and warm up buns at the
7
same time.
Do not warm up toast slices on the warming
7
rack. The toast slices hinder sufficient ventila-
I
tion.
If you accidentally activate the wrong mode
7
(defrost instead of reheat or reheat instead
of defrost), then the selected mode must be
cancelled first by pressing the stop button
before you can select the right mode.
1 Put the warming rack on the housing
place it into the gaps .
2 Place the buns on the warming rack
3
Insert the power plug into the wall socket.
4 Use the +/- digital heat control
desired degree of warming.
5 Press down the start lever
– The indicator light of the stop button
nates and the warming up process begins.
G
6
Turn the buns in order to reach a consistent
browning.
7
The appliance automatically switches off as
soon as the set degree of warming has been
reached.
– The start lever
stop button
Note
To stop the warming up process before it has
7
finished press the stop button
8
After warming up the buns take them off the
rack and and remove the warming rack by
using the warming rack handles.
9 Disconnect the appliance from the wall socket.
Caution
The buns and the housing of the toaster can
7
become very hot during and directly after the
toasting process. Do not touch them with bare
hands.
J
to select the
K .
K
springs back up; and the
H
light disappears.
H
.
H
and
A
A .
H
illumi-