BH Tecnovita YF63 Instrucciones De Uso página 5

T
hank you for purchasing our YF63
My Step. All of our products undergo
rigorous testing to ensure maximum
quality. To use My Step YF63
correctly, first read through the
whole manual before using it.
INTRODUCTION
The device My Step YF63 helps you
to combat the effects of reduced
mobility and physical inactivity, as it
produces a smooth movement of the
legs that improves blood circulation
and activates muscles without leaving
home.
GENERAL SAFETY
INSTRUCTIONS.
1. Inspect the device before use to
ensure that
condition and that the cable is
not damaged. If you notice a
defect or missing parts, contact
the distributor of the product.
2. If you have any health problem,
consult your
before using the device.
3. The device must not be used by
children or the disabled without
suitable adult supervision.
4. This device is for home use only.
5. If you experience any discomfort
while using the unit, cease use
English
it is in good
medical doctor
immediately and consult your
doctor.
6. An excessive use may cause
that the unit gets hot. If this
happens stop using it and let it
get cold.
7. Do not cover the unit during
operation (e.g. with a blanket or
pillow) because it may overheat
and cause damage
8. Do not use the device in
damp/humid surroundings and
prevent it from getting wet. Do
not touch the device with wet
hands while it is operating.
9. To avoid injuries and damages
keep out your hands and other
parts
mechanism when the device is
turned on.
10. Do not insert objects inside the
unit.
11. Do not stand on the device.
12. Do not grip the appliance by the
cable, do not crush it
13. Do not move the device by
pulling the cable.
14. To avoid breakage, do not wrap
the cord around the device.
15. Switch off the device completely
if the appliance is not going to
be used for a while and unplug
it.
16. Do not unplug the appliance
without switching it off first.
17. In the event of a power cut
disconnect the plug from the
mains supply.
18. To disconnect the device from
the main power supply, pull the
plug and not the cable.
5
from the moving