Faults / Maintenance / Notes; Maintenance - DURAVIT SensoWash Manual De Instrucciones

3.6 Faults / Maintenance / Notes

Avoid malfunctions and damage to the product as a result of improper
use!
• Close the stopcock of the main water supply when you clean the fine filter (see
7.2).
• Do not use excessive force on the buttons of the remote control and seat unit.
• Do not climb on or stand on the product, and do not place any heavy objects on the
lid.
• Do not push the lid down with excessive force.
• The spray wand should not be deliberately soiled, sprayed on or clogged up.
• No subsequent modifications, tampering, installation of additional equipment or
repair attempts are permitted on the SensoWash
• Improperly performed repairs can lead to accidents, damage and malfunctions.
• The SensoWash
®
has been activated. Please take this into account during use, cleaning and instal-
lation!
• SensoWash Starck C carries out a self-test after being switched on, the spray
®
wand moves out and then back again after the self-test.

3.7 Maintenance

See maintenance instructions > chapter 7
Starck C is not fully functional until the seat occupation detector
Starck C.
®
EN
45