Plan Vent System - Maytag 3RMED4905TW0 Manual De Uso Y Cuidado

Choose your exhaust installation type
Recommended exhaust installations
Typical installations vent the dryer from the rear of the dryer. Other installations are possible.
A
A. Dryer
B. Elbow
C. Wall G. Vent length necessary to connect elbows
D. Exhaust hood H. Exhaust outlet
Optional exhaust installations
This dryer can be converted to exhaust out the right side, left side, or through the bottom. If
you prefer, you may contact your local dealer to have the dryer converted.
WARNING
Cover unused exhaust holes with the following kit:
279818 (white)
Contact your local dealer.
Failure to follow these instructions can result in death,
fire, electrical shock, or serious injury.
B
C
D
E
F
G
B
H
E. Clamps
F. Rigid metal or flexible metal vent
Fire Hazard

Plan Vent System

Alternate installations for close clearances
Venting systems come in many varieties. Select the type best for your installation. Two close-
clearance installations are shown. Refer to the manufacturer's instructions.
A. Over-the-top installation (also available with one offset elbow)
B. Periscope installation
NOTE: The following kits for close clearance alternate installations are available for purchase.
To order, please see the "Assistance or Service" section.
Over-the-Top Installation:
Part Number 4396028
Periscope Installation (For use with dryer vent to wall vent mismatch):
Part Number 4396037 - 0 cm (0") to 45.72 cm (18") mismatch
Part Number 4396011 - 45.72 cm (18") to 73.66 cm (29") mismatch
Part Number 4396014 - 73.66 cm (29") to 127 cm (50") mismatch
A B
A. Standard rear offset exhaust installation
B. Left or right side exhaust installation
C. Bottom exhaust installation
A
B
C
11