Technical Specifications - PNI Hunting 3C Manual De Instrucciones

50HZ, 60HZ; improper setting may cause camera screen flicker;
Frequency
Incorrect frequency setting may cause the screen to flicker, depending on the environment.
Select "ON", press "OK", camera will continue to record photos/videos by deleting earliest photos or
SD Cycle
video clips
Reset Select "Yes" to reset camera back to factory default settings.
Select "ON", press "OK", to enable password protection for your camera; support totally 6 digits/
Password
alphabets long password access.
About Firmware version (Version: / IMEI: / MCU:)

TECHNICAL SPECIFICATIONS

Image Sensor
Resolution
Day / Night Mode
IR range
IR LEDs
Memory
Operating keys
Lenses
LCD screen
Motion sensor sensitivity
Motion detection distance
Motion detection angle
Photo resolutions
Photo format
Video resolution
Video format
Video recording time
Successive photos
Shoot
Trigger interval
Loop recording
Power supply
Battery type
Loop recording
Power supply
Battery type
External DC
Consumption in stand-by
Stand-by time
Auto Power Off
5 Mega Pixels Color CMOS
2560x1920
Yes
20m
Top: 25 LED, Foot: 31LED
Slot de card SD (max 32 GB)
10
F=3.0; FOV=100°; Auto IR-Cut-Remove (at night)
2" TFT, RGB, 262k
3 levels
20m
110°
5MP/8MP/12MP = 2592x1944/3264x2448/4032x3024
JPEG
1080P (1920x1080): 15FPS, 720P (1280x720), 640x480
AVI
5-60sec. programable
1-5
0.35~0.45s
4s-7s
Yes
Batteries: 8 buc AA/R6; External: adaptor 12V
Alkaline or Li-Ion or NiMH batteries
Yes
Batteries: 12V; Power adaptor DC: 12V
8AA R6
12V
0.173mA
4~6 months (4×AA~8×AA)
In Test mode, the camera will automatically shut down in
60 seconds if you do not touch any key.
27
EN