Notes On Using The Camera - Sony Cyber-shot DSC-TX 1 Manual De Instrucciones

Notes on using the camera
8GB
Changing the language setting
Tile screen language can be changed if'
necessary.
To change the language setting, touch []_11],
then select _ (Seltings) -....+ ?T (Main
Settings) -....+[Language Setting].
Internal memory and "Memory
Stick Duo" media back up
Do not turn off thc" camera, remo'_,e tile battery
pack, or remove the "Memory Stick Duo"
media while the access lamp is lit. Otherwise,
the internal memory data or "Memory Stick
Duo" media may be damaged. Be sure to make
a backup copy to protect your data.
On database files
When you insert a "Memory Stick Duo" media
without a database file into the camera and
turn oil the power, pan of the "Memory Stick
Duo" media capacity is used to automatically
create a database file. It may take some time
until you can perform the next operation.
Notes on recording/playback
• Before you start recording, make a trial
recording to make sure that the camera is
working correctly.
• The camera is neither dust-proof, nor splash-
proof, nor water-proof. Read "Precautions"
(page 57) before operating the camera.
• Avoid exposing the camera to water. If water
enters inside the camera, a malfunction may
OCCllr. In SOllle cases, the camera cannot be
repaired.
• Do not aim the camera at the sun or other
bright light. It may cause the malfunction of
the camera.
• Do not use the camera near a location that
generates strong radio waves or emits
radiation. Otherwise, the camera may not
properly record or play back images.
• Using the camera in sandy or dusty locations
may cause malfunctions.
• If moisture condensation occurs, remove it
befi)rc using the camera (page 57).
• Do not shake or strike the camera. It may
cause a malfunction and you may not be able
to record images. Furthermore, the recording
media may become unusable or image data
may be damaged.
• Clean the flash surface before use. The heat
of flash emission may cause dirt on the flash
surface to become discolored or to stick to
the flash surface, resulting in insufficient
light emission.
Notes on the LCD screen
• Tile LCD scrcen is manufactured using
extremely high-precision technology so over
99.99c_ of the pixels are operational for
effective use. However, some tiny black and/
or bright dots (white, red, blue or green) may
appear on the LCD screen. These dots arc a
normal result of the manufacturing process,
and do not affect the recording.
• If water droplets or other liquids splash on
the LCD screen and make it wet,
immediately wipe off the scrcen with a soft
cloth. Leaving liquids oil the LCD screen
surface can harm the quality and cause a
malfunction.
• Do not press against the LCD screen. The
screen may be discolored and that may cause
a malfunction.
Please use Sony genuine
accessories
If you use accessories manufactured by
companies other than Sony, this could cause a
camera trouble.
• Using other manufacturers' camera cases
with magnets could cause a power supply
trouble.
On camera's temperature
Your camera and battery may get v_arm duc to
continuous use, but it is not a malfunction.
On the overheat protection
Depending on the camera and battery
temperature, you may be unable to record
movies or the power may turn off
automatically to protect the camera.
A message will be displayed on the LCD
screen before the power turns off or you can
no longer record movies.