Product Description And Specifications - Bosch GluePen Manual Original

OBJ_BUCH-1693-004.book Page 10 Thursday, March 31, 2016 4:01 PM
10 | English
Product Description and Specifica-
tions
Intended Use
The glue pen is intended for solvent-free bonding of e. g., pa-
per, cardboard, cork, wood, leather, textiles, foam, plastics,
(except PE, PP, PTFE, Styropor® and soft PVC), ceramics,
porcelain, metal, glass and stone.
Product Features
The numbering of the product features refers to the illustra-
tion of the glue pen on the graphics pages.
1 Nozzle
2 Silicone cap
3 Feed trigger
4 On/Off button
5 LED indicator
6 Glue stick*
7 Glue stick opening
8 Socket for charge connector
9 Plug connector for charger
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Cordless glue pen
Article number
Heating time
Gluing temperature
Glue stick, diameter
Glue stick, length
Weight according to
EPTA-Procedure 01:2014
Battery
Rated voltage
Capacity
Number of battery cells
Operating duration per bat-
tery charge (according to
Bosch testing procedures)
Battery Charger
Article number
Charging time
Output voltage
Charging current
Allowable charging tempera-
ture range
Weight according to
EPTA-Procedure 01:2014
Protection class
1 609 92A 2T6 | (31.3.16)
Assembly
Battery Charging (see figure A)
 Observe the mains voltage! The voltage of the power
The battery is supplied partially charged.
To ensure full battery capacity, completely charge the battery
(at least 2–3 hours) before using for the first time.
The glue pen cannot be used during the charging procedure;
it is not defective, when it does not function during the charg-
ing procedure.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
ion battery against deep discharging. When the battery is dis-
charged, the glue pen is switched off by a protective circuit:
The glue is no longer heated.
GluePen
3 603 BA2 0..
 Flashing  Continuous light
s approx. 15
– Plug the mains plug of the battery charger into the socket
°C approx. 170
mm Ø 7 Disconnect the battery charger from the mains supply when
not using it for longer periods.
mm 150
 Protect the battery charger against moisture!
A significantly reduced working period after charging indi-
kg 0.14
cates that the battery is used and must be replaced.
Li-Ion
Observe the notes for disposal.
V= 3.6
Ah 1.5
Operation
1
min approx. 30
Starting Operation
(corresponds with
To save energy, only switch the glue pen on when you are us-
approx. 6 glue sticks)
ing it.
Switching On
2 609 120 4..
– To start the operation, press the On/Off button 4 until the
h 3.0–4.0
V= 5
LED Indicators
mA 500
green
°C +5 ... +40
kg 0.07
 Flashing  Continuous light
/II
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
LED Indicators
red green Meaning

– The battery is being charged

– The battery is fully charged
The battery has less than 30% of its

–
capacity and should be charged

– The battery is completely discharged
outlet and the charger plug 9 into socket 8.
LED indicator 5 lights up green.
Meaning

The glue is being heated
for approx. 15 s

Glue pen ready for operation
Bosch Power Tools