Product Description And Specifications; Noise/Vibration Information; Technical Data - Bosch GBL 18V-120 Professional Manual Original

Ocultar thumbs Ver también para GBL 18V-120 Professional:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
OBJ_BUCH-2543-002.book Page 11 Monday, October 24, 2016 10:37 AM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The power tool is intended for blowing together non-harmful
substances (e.g. sawing chips, metal chips, stone dust, etc.)
produced during sawing, drilling or grinding. Bore holes can
also be blown out with suitable accessories.
The power tool is not suitable for blowing together hot, flam-
mable or explosive materials.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch with stage selector
2 Handle
3 Battery pack*
4 Air intake
5 Motor housing
6 Nozzle
7 Battery unlocking button
8 Notch for accessory connection
9 Extension tube
10 Bore hole nozzle
11 Dust collection tube
12 Bayonet lock
13 Notch for dust collection tube
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-1.
Typically the A-weighted noise levels of the product are:
Sound pressure level 82 dB(A); Sound power level 93 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
and uncertainty K determined ac-
h
cording to EN 60745-1:
2
2
a
<2.5 m/s
, K=1.5 m/s
.
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
Bosch Power Tools
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Technical Data

Cordless blower
Article number
No-load speed
Air speed, max.
3
Air volume
m
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
2)
– during operation
and during
storage
Recommended batteries
Recommended chargers
Recommended chargers for
wireless charging batteries
Operating duration per battery-
pack charge
min/Ah
– Blower level I
– Blower level II
min/Ah
Technical data determined with battery from delivery scope.
1) depending on the battery pack being used
2) Limited performance at temperatures <0 °C
Assembly
Battery Charging
 Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium-ion battery of your power tool.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The battery must be removed from the power tool to charge it.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
ion battery against deep discharging. When the battery is dis-
charged, the power tool is switched off by a protective circuit.
1 609 92A 3HE | (24.10.16)
English | 11
GBL 18V-120
3 601 JF5 1..
-1
min
17000
m/s
75
/min
2.0
1)
kg
1.4 – 1.68
°C
0...+45
°C
–20...+50
GBA 18V..
GBA 18V... W
AL 18..
GAL 3680
GAL 18... W
9
5

Publicidad

Tabla de contenido
loading

Tabla de contenido