Preparing The Appliance For Operation; Operation Of The Induction Burner - Unold 58105 Instrucciones De Uso

PREPARING THE APPLIANCE FOR OPERATION

1. Remove all packaging materials
and transport safety devices. Keep
packaging materials away from
children - danger of suffocation!
2. Wipe off the appliance with a
damp cloth.

OPERATION OF THE INDUCTION BURNER

Note: Your new burner is equipped with sensor buttons. All settings can be made
with a light touch of the finger. Please do not operate the sensor buttons with
wet fingers, and ensure that you do not place any objects on the buttons, in or-
der to avoid malfunctions.
1. Plug the power plug into an elec-
trical outlet use the EIN/AUS but-
ton to switch on the appliance.
2. A brief signal tone will sound, the
indicator lamp of the EIN/AUS
button will be illuminated, the
power indicator light (Watt) will
flash.
3. Caution: If you do not make any
additional settings on the appli-
ance within one minute, the appli-
ance will switch off.
4. You can control the appliance
either by power or by temperature.
Press the "FUNCTION" button to
switch between the two modes.
The power level or temperature
level can be changed at any time
while you are cooking by pressing
the "+" or "-" buttons. The basic
setting for the appliance is 1,200
watt.
26
Copyright UNOLD AG | www.unold.de
3. Place the appliance on a level,
solid and dry surface with suffi-
cient clearance on all sides.
4. Plug the power cord into an elec-
trical outlet.
5. Place a suitable pot with food to
be cooked in the middle of the
burner.
Control via heating power
6. Press the "FUNCTION" button
once. The "Watt" indicator lamp
lights up. The power level will be
shown in the display. Use the "+"
and "-" buttons to change the
power level.
7. The following settings are pos-
sible:
Model Model 58175
58105
Left
200 W 500 W
400 W 800 W
600 W 1.200 W 1.000 W
800 W 1.500 W 1.200 W
1000 W 1.800 W 1.300 W
1200 W 2.000 W 1.500 W
1400 W
1600 W
Right
500
800