6.
Connect the LIGHT last. To verify system
operation, read the next section and put the
system in Mode 6. or 7. which will allow ON / OFF
control via the switch.
LIGHTING CONTROL OPTIONS
1.
The ON / OFF switch has two functions. To turn
the load on and off momentarily press the switch.
To use it for setting options, press for 5 seconds
to advance through the 16 work modes described
below.
2.
The controller requires 10 minutes of continuous
transition values before it starts to work. These
constraints avoid false transitions due to lighting
or dark storm clouds.
3.
The list below describes each of the modes,
please note that the last 8 modes will have the
point after the mode lit:
Number 0
Number 1
Number 2
Number 3
Number 4
Number 5
Number 6
Number 7
Number 0.
Number 1.
Number 2.
Number 3.
Dusk-to-Dawn, light is on all night.
Light is turned on after sundown for 1 h.
Light is turned on after sundown for 2 h.
Light is turned on after sundown for 3 h.
Light is turned on after sundown for 4 h.
Light is turned on after sundown for 5 h.
Light is turned on after sundown for 6 h.
Light is turned on after sundown for 7 h.
Light is turned on after sundown for 8 h.
Light is turned on after sundown for 9 h.
Light is turned on after sundown for 10 h.
Light is turned on after sundown for 11 h.