Descargar Imprimir esta página

HIKOKI С 3605DYA Instrucciones De Manejo página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 84
English
Hose attachment port
d
Joint
f
Link/independent switch
g
Link mode display lamp
h
Cleaner switch
j
Link/independent switch of cleaner
k
Link mode display lamp of cleaner
l
Washer (A)
;
Saw cover (B)
z
Wing nut
x
Dust cover
c
Rubber cap
v
Saw cover (A)
b
Link scale
n
Guide
m
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
C3605DYA: Cordless Circular Saw
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
V
Rated voltage
n
No-load speed
0
Switching ON
Switching OFF
Disconnect the battery
Prohibited action
Mode selector switch
Lighting mode switch
Always ON (turn off after 2 minute)
Light only SW-ON
Always OFF
Link/independent switch
Light Off : Independent mode
Light Blinking: Searching
Light On: Link mode
Link/independent switch of cleaner
(sold separately)
Light Off : Independent mode of cleaner
(sold separately)
Light Blinking: Searching of cleaner
(sold separately)
Light On: Link mode of cleaner
(sold separately)
Remaining battery indicator switch
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
NOTE
To prevent the battery power consumption caused by
forgetting to turn off the LED light, the light goes off
automatically in about 2 minutes.
18

Publicidad

loading