Disposal Of The Packaging; Assembling The Appliance - Silvercrest SDB 1500 B2 Instrucciones De Uso

Disposal of the packaging

The packaging protects the appliance from damage during transport. The pack-
aging materials have been selected for their environmental friendliness and ease
of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the appliance's original packaging during the warranty
period so that the appliance can be packed properly for return shipment in
the event of a warranty claim.

Assembling the appliance

♦ Undo the screw with the plastic protector
using a Phillips screwdriver.
♦ Remove the plastic protection
♦ Push the main unit
♦ Use the previously removed screw and a Phillips screwdriver to screw the main
unit onto the connection nozzle
♦ Attach a pad
NOTE
► You can use the pad for hard floors
With the pad for soft floors
► If you intend to clean carpeting, fit the steam broom
ring
recess on the steam broom
ring
slide over the carpet.
► To remove the carpet ring
aid
SDB 1500 B2
into the connection nozzle
/ from below onto the steam broom
. Make sure that the carpet ring release aid
so that it clicks into place. This will allow the steam broom
. Pull the steam broom
from the connection nozzle
.
on the steam broom
.
to clean stone floors, for example.
, you can clean certain types of carpets.
. Push the steam broom
, press your foot onto the carpet ring release
carefully off the carpet ring
.
.
onto the carpet
points towards the
onto the carpet
to
.
GB │ IE
29 ■
│