3. CONTROL SYSTEM
Before operating our company's water
pump, carefully read and understand the
owner's manual and be familiar with each
control function. Know how to operate
and how to do in a urgency condition.
1. Fuel Lever
The fuel lever is used for fuel flowing from the
fuel tank to carburetor.
Set the fuel lever to the "OPEN" position.
When not operating the engine, set the fuel lever
to the "CLOSE" position.
THROTTLE LEVER
CLOSE
2. Engine Switch
The engine switch is used for opening or
closing ignition circuit :
Set the engine switch to the "OPEN" position
to run the engine, and set it to the "CLOSE"
position to stop the engine.
ENGINE
SWITCH
3. Choke Lever
The choke lever is used for opening and
closing the choke of the carburetor.
Set the choke lever to the "CLOSE" position for
cold starting.
Set the choke lever to the "OPEN" position
for normal operation or the Engine's warm
starting.
OPEN
English
Owner´s manual
CLOSE
OPEN
ENGINE
SWITCH
CLOSE
OPEN
33