Nikon RifleHunter 1000 Manual De Instrucciones página 38

Resumo operacional
4. Medição
En
Nota: P ressionar e manter pressionado o botão POWER faz com que
Fr
todos os símbolos sejam exibidos no visor LCD interno. Depois
de remover o seu dedo do botão POWER, é exibido o último
Es
ajuste usado. (Se você pressionar brevemente o botão POWER
Pt
e remover o dedo, o visor LCD pode exibir o último ajuste
usado sem exibir todos os símbolos. Isto não é uma avaria ou
outro problema.)
Antes de medir, certifique-se de confirmar os ajustes, tais como
unidade, modo de medição/exibição e modo de prioridade.
◎
: Veja a seção do modo relevante neste manual, quanto aos
ajustes.
Measurement
1. Pressione o botão POWER para ligar a energia.
Measurement
(A energia é desligada 8 segundos após a última operação.)
1. Press the POWER button for power-on.
1. Press the POWER button for power-on.
Immediately after power-on. Stand-by.
Em espera.
Imediatamente após ligar a
(Initializing)
energia (Inicialização)
Immediately after power-on. Stand-by.
(Initializing)
2. Aim at the target.
2. Mire no alvo. Position the target at the center of the reticle
2. Aim at the target.
Posicione o alvo no centro do retículo
Position the target at the center of the reticle
Target focusing.
Mira do alvo
Target focusing.
[Single measurement]
74 3. Press POWER button once to start single measurement.
[Single measurement]
3. Press POWER button once to start single measurement.
Target focusing.
Target focusing.
Target focusing.
[Medição simples]
[Single measurement]
[Single measurement]
[Single measurement]
3. Press POWER button once to start single measurement.
3. Pressione o botão POWER uma vez para iniciar a medição simples.
3. Press POWER button once to start single measurement. 3. Press POWER button once to start single measurement.
Medição.
Measuring.
Measuring.
Measuring.
4. Após a medição, os indicadores "distance" (distância) ou "fail to
measure" (falha na medição) são exibidos por 8 segundos, e
então a energia é desligada. Se você pressionar o botão POWER
quando a energia estiver ligada (enquanto o visor interno estiver
4. After measurement, "distance" or "fail to measure" indicator are displayed for 8 seconds, then power turns off. If you press the POWER
button during power-on (while the internal display is lit), another single measurement starts. 4. After measurement, "distance" or "fail to measure" indicator are displayed for 8 seconds, then power turns off. If you press the POWER 4. After measurement, "distance" or "fail to measure" indicator are displayed for 8 seconds, then power turns off. If you press the POWER
iluminado), tem início uma outra medição simples.
button during power-on (while the internal display is lit), another single measurement starts.
button during power-on (while the internal display is lit), another single measurement starts.
Failure to measure or Upward measurement. Downward measurement.
Falha na medição
Exibe o número medido.
Failure to measure or Upward measurement. Downward measurement.
unable to measure distance. Failure to measure or Upward measurement.
unable to measure distance.
ou incapaz de unable to measure distance. Displays the measured figure.
Displays the measured figure. Displays the measured figure.
medir a distância. [Continuous measurement]
[Continuous measurement]
[Continuous measurement]
3. Keep pressing POWER button to start continuous measurement up to 20 seconds. The internal display shows "distance" and
3. Keep pressing POWER button to start continuous measurement up to 20 seconds. The internal display shows "distance" and
"fail to measure" indicator alternately. 3. Keep pressing POWER button to start continuous measurement up to 20 seconds. The internal display shows "distance" and
Note: Laser irradiaton mark is blinking during the measurement. "fail to measure" indicator alternately. "fail to measure" indicator alternately.
Note: Laser irradiaton mark is blinking during the measurement.
Note: If you stop pressing the button, the continuous measuremen stops Note: Laser irradiaton mark is blinking during the measurement.
Note: If you stop pressing the button, the continuous measuremen stops Note: If you stop pressing the button, the continuous measuremen stops
Failure to measure or Displays the measured Displays the measured
Failure to measure or Displays the measured figure. (Target 1) Displays the measured Displays the measured figure. (Target 2)
unable to measure distance. Failure to measure or
figure. (Target 1) figure. (Target 2)
unable to measure distance. figure. (Target 1)
unable to measure distance.
4. After measurement, "distance" or "fail to measure" indicator are displayed for 8 seconds, then power turns off. If you press the POWER
button during power-on (while the internal display is lit), another single measurement starts.
[Medição contínua]
3. Continue pressionando o botão POWER para iniciar uma
medição simples, por até aprox. 5 segundos. O visor interno
Failure to measure or Upward measurement.
Failure to measure or Upward measurement.
Failure to measure or Upward measurement.
unable to measure distance. unable to measure distance.
mostra alternadamente o indicador "distance" (distância) e "fail to unable to measure distance.
Displays the measured figure.
Displays the measured figure.
measure" (falha na medição).
[Continuous measurement]
[Continuous measurement] [Continuous measurement]
Nota: A marca de irradiação de laser fica piscando durante a
3. Keep pressing POWER button to start continuous measurement up to 20 seconds. The internal display shows "distance" and 3. Keep pressing POWER button to start continuous measurement up to 20 seconds. The internal display shows "distance" and
3. Keep pressing POWER button to start continuous measurement up to 20 seconds. The internal display shows "distance" and
medição. Failure to measure or
"fail to measure" indicator alternately. "fail to measure" indicator alternately.
"fail to measure" indicator alternately.
unable to measure distance.
Note: Laser irradiaton mark is blinking during the measurement. Note: Laser irradiaton mark is blinking during the measurement.
Nota: Se você parar de pressionar o botão, a medição contínua Note: Laser irradiaton mark is blinking during the measurement.
Note: If you stop pressing the button, the continuous measuremen stops Note: If you stop pressing the button, the continuous measuremen stops
Note: If you stop pressing the button, the continuous measuremen stops
para.
[Continuous measurement]
3. Keep pressing POWER button to start continuous measurement up to 20 seconds. The internal display shows "distance" and
"fail to measure" indicator alternately.
Note: Laser irradiaton mark is blinking during the measurement.
Note: If you stop pressing the button, the continuous measuremen stops
Falha na medição ou Exibe o número
Failure to measure or Displays the measured Displays the measured
Failure to measure or Displays the measured
Failure to measure or
figure. (Target 1)
incapaz de medir a unable to measure distance. unable to measure distance. figure. (Target 1) figure. (Target 1) medido
unable to measure distance.
distância. (Alvo 1)
Pisca enquanto realiza medições.
Failure to measure or
unable to measure distance.
4. After continuous measurement, the measure results are displayed for 8 seconds, then power turns off. If you press the POWER 4. After continuous measurement, the measure results are displayed for 8 seconds, then power turns off. If you press the POWER
4. After continuous measurement, the measure results are displayed for 8 seconds, then power turns off. If you press the POWER
button during power-on (while the internal display is lit), another measrement starts.
4. Após a medição contínua, os resultados medidos são exibidos button during power-on (while the internal display is lit), another measrement starts. button during power-on (while the internal display is lit), another measrement starts.
Downward measurement.
por 8 segundos, e então a energia é desligada. Se você
pressionar o botão POWER quando a energia estiver ligada
(enquanto o visor interno estiver ativo), tem início uma outra 4. After continuous measurement, the measure results are displayed for 8 seconds, then power turns off. If you press the POWER
button during power-on (while the internal display is lit), another measrement starts.
medição.
5. Display examples of each modes 5. Display examples of each modes
5. Display examples of each modes
5. Display examples of each modes
Displays the measured
figure. (Target 2)
5. Display examples of each modes
5. Exibir exemplos de cada modo
Downward measurement.
Downward measurement.
Downward measurement.
Displays the measured figure.
Upward measurement. Downward measurement.
Displays the measured figure.
Modo de distância
linear
Horizontal distance mode
Linear distance mode
Exibe o número
Displays the measured Displays the measured
Displays the measured
figure. (Target 2)
figure. (Target 2) figure. (Target 2) medido
(Alvo 2)
Displays the measured Displays the measured
figure. (Target 1) figure. (Target 2)
5. Display examples of each modes
En
Fr
Es
Pt
Modo de distância
horizontal
Horizontal distance mode
Line
75