Cleaning And Care Instructions - GUTMANN FG Instrucciones De Uso

1 Drill hole (prepared on site by the customer)
2 Fan pedestal
3 Exhaust air hose
4 Non-return valve
5 Bottom flange with attachment points
6 Roof cladding (provided on site by the
customer) glue the entire surface
7 3-pin plug
8 Feed line to extractor hood
9 4-pole connector
10 Control line
Cleaning and care
Clean surfaces
Danger due to electric shock! To disconnect
the GUTMANN fan from the power supply
and secure it against accidental activation,
pull the plug out of the socket or switch off
the fuse. When cleaning, make sure that
no water penetrates the device. Regular
cleaning of the surface saves laborious
removal of stubborn contamination.
Note: Do not use alcohol (spirits) on plastic
surfaces, as dull spots may result. Do not
use aggressive cleaning agents or agents
containing acid or lye.
Fire hazard!
The performance of the GUTMANN fan is
reduced by grease residues and the fire
hazard increases. To prevent fire hazards,
clean the device at least twice a year.

Cleaning and care instructions

When cleaning the GUTMANN fan, also
remove any grease deposits from the
accessible housing components. This
prevents a fire hazard and optimum function
is maintained. Use hot soapy water or a
mild window cleaning agent to clean the
GUTMANN fan.
Do not scratch off baked-on deposits, but
soften them using a damp cloth. Do not
use abrasive agents or scouring pads.
Note: Do not use alcohol (spirits) on plastic
surfaces, as dull spots may result. Use only
a soft, damp cloth to clean the electrical
supply line, exhaust air hose and other
plastic parts (mild soap). Do not use
stainless steel cleaning agents.
Stainless steel surfaces:
Use a mild and non-abrasive stainless
steel cleaning agent. Do not clean stainless
steel surfaces with abrasive scouring pads
or with cleaning agents containing sand,
soda, acid or chloride! Clean in direction of
polish only.
We recommend our GUTMANN stainless
steel cleaning agent no. TZ 710.
en