How The Machine Makes Ice - Orien FS50OD Manual Del Usuario

Mdquina automdtica para hacer hielo al aire libre
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.
After three minutes,
the machine
will automatically
go into the ice-making
stage, and the
sound of flowing water will be heard.
3.
When the batch of ice has been fully formed, the ice will automatically
be harvested
to the ice
storage bin.
4.
When the ice storage bin is full, the sheet of cubes does not fall completely
and it holds the
ice-full probe open. The machine
stops making ice and automatically
progresses
to the cold
preservation
stage. During this stage, the compressor
works regularly to keep the temperature
low to reduce ice melting.
5.
The unit will start making ice again after the ice cubes are removed.
Then the ice-full probe
swings back to operating position.
IMPORTANT:
A#hough
the unit has been
tested
and cleaned
at the factory,
due to long-term
transit
and
storage,
the first
batch of cubes
must be discarded.
Never
turn the water
supply
tap off'when
the ice maker
is working.
Never
touch the evaporator
when
the machine
is running?
Except
to take ice from
the unit, keep
the door
closed
to reduce
ice melting
and insure proper
ice formation.
How the Machine
Makes lee
Turn the Power switch to the ON position.
The Power indicator
light will light and the machine
will automatically
go into the ice-making
stage.
There are two distinct cycles: freeze and harvest.
During the freeze cycle, water flows to the evaporator
surface.
In the harvest
cycle, the ice is
released.
A complete
cycle can take 15 to 40 minutes,
depending
on temperature
and operating
conditions.
Freeze:
During the freeze cycle the compressor
is pumping refrigerant,
the fan motor is blowing
air, and the water pump is circulating
water. When the batch of ice has been fully formed, the ice
maker stops the freeze cycle and begins the harvest cycle.
Harvest:
During
the harvest
cycle
the compressor
is still
operating,
but the water
pump
has
stopped.
The hot
gas valve
opens,
diverting
hot refrigerant
gas
into the
evaporator.
The hot
refrigerant
gas warms
the evaporator,
causing
the cubes
to slide,
as a unit, off the evaporator
and
into the storage
bin. The freeze
cycle will restart
when
all the cubes
have been harvested.
17

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido