Vacuum Cleaner Description; Labels; Optional Kits; Accessories - Blastrac BDC3140 DBP-3020 Manual De Instrucciones

Instruction Manual BDC3140 DBP/LPP-3020

Vacuum cleaner description

Labels

1. Identification plate
Code of the model which includes technical
specifications, serial number, EC marking, year of
manufacture
2. Suction connecting hose
3. Control panel
4. Vacuuming unit
5. Dust container
6.
Filtering chamber
7. Outlet
8. Container release handle
9.
Panel power plate
Indicates that the panel is powered by the voltage
indicated on the data plate.
10. Inlet
11. On/off switch
12. Band latch
13. Filter cartridge cleaning compressor (400V/50Hz)
14. Hot surface warning plates
They warn against the danger of being burnt because of
the high temperature reached by the indicated surfaces.
15. Powered electrical equipment warning plate
It signals the presence of powered electrical equipment.
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (10) and blows out through the outlet
(7). After the hose and tools have been fitted, make sure
that the motor turns correctly.
Before turning the vacuum cleaner on, fit the suction hose
into the inlet and then fit the required tool on to the end
part. Refer to the manufacturer's accessory catalogue or
Service Centre in order to choose the accessory to be used.
This vacuum cleaner is equipped with an internal baffle
GB
plate which subjects the vacuumed substances to a circular
centrifugal movement that makes them drop into the
container. The vacuum cleaner is equipped with filters which
enable it to be used for the majority of applications.
Figure 1

Optional kits

Please contact the manufacturer's sales network for
information on optionals.
Instructions for installing the optional are included in the
conversion kit.
WARNING!
Use only supplied and authorised genuine spare
parts.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorised by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
Figure 2
A B
(mm) (mm)
1700 1350

Unpacking, moving, use and storage

Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight).
www.blastrac.eu ‒ info@blastrac.eu
4/16
C
Kg
(mm)
700 196