ZIBRO CLIMA PX150 Comfort Instrucciones De Uso página 48

C
OPERATING THE AIR CONDITIONER
1
Press
the room temperature:
-
-
2
Use
when this time has run down.
3
Select with
,
4
Select with
5
Set the temperature that must be maintained (in the range from 16°C to 30°C)
with switched
6
When the unit is ON the display shows the room temperature (
room temperature will again be displayed.
7
This setting can only be used when the cooling function is activated. Press
Every hour the temperature setpoint will raise with 1°C, after 2 hours the
temperature remains the same. After 12 hours the air-conditioner will
automatically turn off. Pressing
mode the temperature set cannot be changed.
Remote control
The air conditioner can be operated with remote control. Two AAA-batteries are
required to use the remote control.
4
48
ON/OFF
to switch the unit on or off. The unit selects the mode depending on
higher than 23°C, cooling mode;
between 20°C and 23°C, fan mode.
Time switch
to set a working time between 1 and 12 hours. The unit switches off
Mode switch
: automatic, cooling or fan. The corresponding LED will lit:
or .
Fan speed
the fan speed:
Temperature selection
and
Digital display
or to see the set temperature (
'SLEEP' setting
low, high. LED will show this.
. The display will show the setting.
is on), after a few of seconds the
again de-activates this function. In 'SLEEP'-
is on). Use
.